How to

How to Make CBD Oil With Coconut Oil: What's in the Jar

How to make CBD oil with coconut oil: decarb, infuse, strain, store. Then the jar sums: lab-sheet CBDA to mg per mL, THC in the jar and cost.

By Staff, CBD Candid 4 min read

To make CBD oil with coconut oil, bake ground hemp flower at about 225°F for 30 minutes, warm it in coconut oil on low heat for up to four hours, then strain and store it. At two recipes’ published ratios, flower rated 10 to 20% CBDA tops out near 5 to 10 mg per mL.

This is an evergreen how-to; prices and the federal note can date.

How to make CBD oil with coconut oil, step by step

  1. Read the lab report. Note the CBDA, CBD and THC lines.
  2. Grind coarsely. Cobo CBD warns that pieces too small will burn.
  3. Decarb. Cobo bakes a single layer under foil at 225°F for 30 minutes. Emily Kyle gives 240°F for 40 minutes, but labels that time for THC flower.
  4. Infuse on low heat. Healthline says 130 to 150°F for around 60 minutes. Cobo says 30 minutes to four hours. None of the text read measures the result.
  5. Strain. Oil left in the flower is CBD left behind.
  6. Store and label. Healthline says use it within a year; Edible Vermont says two months at room temperature or six in the fridge.

Do you need to decarb hemp flower before infusing?

Cobo says yes: heat turns CBDA into CBD. Edible Vermont skips the oven for a long, slow infusion, with no measure of whether that worked.

How strong is homemade CBD oil? The jar math

Multiply grams of flower by the CBDA percentage, by 10, then by 0.877 for milligrams of CBD. Divide by millilitres of oil. If your sheet prints a converted total CBD figure, use that instead.

The 0.877 is our arithmetic: PubChem lists CBD at 314.5 and CBDA at 358.5. The USDA hemp rule, 7 CFR 990.1, states that ratio for THCA only, and PubChem gives THCA and CBDA the same formula and weight. We read both on 6 November 2026.

Flower lab result1 oz in 16 fl oz (Emily Kyle)14 g in 250 ml (Cobo)
10% CBDA2,486 mg CBD, 5.3 mg/mL1,228 mg CBD, 4.9 mg/mL
15% CBDA3,729 mg CBD, 7.9 mg/mL1,842 mg CBD, 7.4 mg/mL
20% CBDA4,973 mg CBD, 10.5 mg/mL2,456 mg CBD, 9.8 mg/mL
0.3% THC, assumed85 mg THC, 0.18 mg/mL42 mg THC, 0.17 mg/mL

Every figure is a ceiling: full decarboxylation, full extraction, no oil lost in the strainer. No loss figure was sourced, so none is printed. We read Emily Kyle’s 16 ounces as fluid ounces (473 mL), since she lists pint jars.

Cobo’s 2,800 mg example is labelled prior to decarboxylation; if its 20% is CBDA, it becomes 2,456 mg. A shelf oil at 50 mg/mL, the Lazarus Naturals strength in our dropper guide, is roughly five to ten times the jar.

Is homemade CBD oil cheaper per mg?

On paper, yes. As a worked example, Horn Creek Hemp’s page, read on 6 November 2026, lists a 30 g “fat ounce” at $35 to $50 with kief options. Its menu percentages are not labelled CBDA in the text read, so we assume the same three ratings.

At $35 that is 1.3, 0.9 and 0.7 cents per mg at 10, 15 and 20%; at $50, 1.9, 1.3 and 1.0. Coconut oil and infusion loss push it up.

Our dropper guide recorded Lazarus at 2.7 and 2.0 cents per mg; we could not re-read that price today. The catch: matching one 50 mg dropper takes about 5 to 10 mL of your oil, at a strength none of the recipes read here measures.

How much THC ends up in the jar?

Infusing whole flower carries its THC too. Flower at 0.3% THC, an assumed input, puts up to 85 mg in the pint and 42 mg in the cup, about 213 and 105 times 0.4 mg. Use your sheet’s total THC line.

That 0.4 mg is for scale only. The Congressional Research Service, read on 6 November 2026, ties it to the innermost packaging of a final product for retail sale, so nothing here says it governs a kitchen jar. Our full-spectrum cap post covers the retail side.

CRS says portions of the new hemp definition are delayed to December 11, 2026, from November 12. The passages read do not say which date governs the per-container limit, and the report’s latest stated date is September 28, so check first. Workplace testing? See our drug-test post.

Homemade CBD oil questions

What is decarboxylation?

It is the heating step that turns a plant’s acid form into its neutral form. In hemp, CBDA becomes CBD; the federal hemp rule describes the same reaction for THCA. The molecule sheds weight as it converts, so only about 88% of a CBDA figure survives as CBD.

How much hemp flower per cup of coconut oil?

Cobo uses 14 g per 250 ml cup. Emily Kyle’s ratio works out to about 14 g a cup too, if her ounces of oil are fluid ounces. Healthline and Edible Vermont go by volume, one cup of ground flower per cup of oil, which gives no strength sum.

How strong is homemade CBD oil?

At those two weighed ratios, about 4.9 to 10.5 mg per mL at most, on flower rated 10 to 20% CBDA. A real jar lands lower, since that ceiling assumes nothing is lost, by an amount nobody can state without a lab test.

Before you dose from a jar

A homemade jar has no lab report of its own, so your label is an estimate. Products discussed are not evaluated by the FDA and are not intended to diagnose, treat, cure or prevent any disease. For adults.